AD Plus LED Light Status

AD Plus LED Light Status


On a normal operating device, the LED light statuses are OFF except for the power LED.:




From Left to Right:

1. Power LED - Green ON when the camera is ON.
2. Alert/Alarm LED - turns ON when the panic button is pressed or when an alarm is triggered; (optional with audible sound)
3. Satellite LED - is ON GPS location is not working.
4. Cellular Network - turns ON when there is no data, weak signal, still recording but is not connecting to the server because no network signal.
5. Wifi -  when ON, can connect with the camera directly to configure some parameters. Usually done when installing the device. 
6. Road -  ON  road-facing camera is not working/recording. 
7. Person - ON in-cabin camera is not recording.
8. Camera - ON aux camera is not recording.




    • Related Articles

    • How to create a hotspot from an AD Plus camera ?

      This article explains how to create a hotspot from an AD Plus camera.  This is an optional section in case the customer wants to leverage the camera as a hotspot to provide data to other devices P.S: This is disabled by default and only enabled upon ...

    • How to retrieve video footages from AD Plus Device ?

      This article explains how to retrieve video footage from the AD Plus Device On USB Through Veyes App Steps to retrieve video footage. In order to retrieve footage from the AD Plus using a USB the following is required: The camera needs to be ...

    • How to update the Configuration/Firmware for an AD Plus camera ?

      This article explains how to update the Configuration/Firmware for an AD Plus camera.  The following section is dedicated to instances where the device is not communicating with the network and requires an FW update. In this case, the support agent ...

    • AD Plus - Set up APN Manually

      Remote APN is not possible since the device could not go online. Manual APN set up procedure is needed. Power off the ignition and wait until all lights on the camera should be off 1. Download the Veyes app (Android and IOS) 2. Open the app and in ...

    • Zenducam Trax - Downloading device status report

      This article explains how to download device status report Steps:   Login to Zenducam Trax > Go to Insights  Click Status to view the camera & telematics device status To download or print the report click on the options displayed on the right side ...