AD Plus - Set up APN Manually
Remote APN is not possible since the device could not go online. Manual APN set up procedure is needed.
Power off the ignition and wait until all lights on the camera should be off
1. Download the Veyes app (Android and IOS)
2. Open the app and in the address enter - 192.168.240.1
3. Port - 9006
4. Minimize the app
5. Go to phone settings - go to Wifi and select network called SN-003
6. Power On the vehicle and the camera should turn On
7. Login to the Veyes app using admin for both Username and Password
8. Click Preferences at the top right portion of the app
9. On the left Menu tabs click Network >> Communication Module
APN = gigsky-02
Certification = none
Carrier = Auto
10. Click Save
11. Power Off the device then power it back On again.
Please let us know if you have questions or clarifications.
Related Articles
How to create a hotspot from an AD Plus camera ?
This article explains how to create a hotspot from an AD Plus camera. This is an optional section in case the customer wants to leverage the camera as a hotspot to provide data to other devices P.S: This is disabled by default and only enabled upon ...How to update APN in Tablets?
This documents provides step by step process for updating the APN in Tablets. In the home page, tap 5-10 time fast on the screen to unlock the tablet Use below password: 8889981122 Push the back button twice to get out of the portal Upon exit the ...How to retrieve video footages from AD Plus Device ?
This article explains how to retrieve video footage from the AD Plus Device On USB Through Veyes App Steps to retrieve video footage. In order to retrieve footage from the AD Plus using a USB the following is required: The camera needs to be ...How to update the Configuration/Firmware for an AD Plus camera ?
This article explains how to update the Configuration/Firmware for an AD Plus camera. The following section is dedicated to instances where the device is not communicating with the network and requires an FW update. In this case, the support agent ...AD Plus LED Light Status
On a normal operating device, the LED light statuses are OFF except for the power LED.: From Left to Right: 1. Power LED - Green ON when the camera is ON. 2. Alert/Alarm LED - turns ON when the panic button is pressed or when an alarm is triggered; ...