Close SD door

Procedure:

Please see the below image and ensure that the SD door locking switch is closed.

• Related Articles

• Flex - Door Sensor Install Guide GF

  Pre-Installation Please refer to the Getting Started Guide to understand basic device functionality and comprehensive device installation instructions. Recommended Tools and Supplies Tools » Electric Drill » Digital Multi Meter (DMM) » Wire Strippers ...

• ZenduCAM SW Troubleshooting

  This article explains the multiple methods to troubleshoot the SmartWitness ZenduCAM. Information to Collect Record the information of any hardware that is currently in use: DRID/SERIAL # of the Camera device Vehicle # in which the Camera is ...

• Install - KP1S 4G 3 Wire Camera

  Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...

• Install - CP1 with 3G Camera

  Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...

• Install - KP1s + SVC 400 DVR Multi-Channel Camera

  Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...