Electronic Log transfer error Carrier's USDOT Number

Electronic Log transfer error "Carrier's USDOT Number "

This error occurs when the driver or co-driver on the logs being transferred does not have a valid carrier number in their user settings (under the HOS tab).

Steps

Carrier number or DOT number can be added by following the below steps :
  1. Select Administration > Users
  2. Select appropriate user/driver
  3. Select HOS Settings
  4. Enter the driver's USDOT number (numbers only) in the Carrier Number field
  5. Click Save
DOT number must contain numbers only .





    • Related Articles

    • Log out from Geotab Drive

      This article explains how to log out from the Geotab Drive. Steps       1. Select 'HOS'       2. From the 'Status' screen, press either 'OFF DUTY' or 'SLEEPER BERTH'       3. Select your username and then press the 'Log out' button       4. Next, you ...

    • Mygeotab - Adding Carrier number to multiple drivers profile

      This article explains how to add carrier number to multiple drivers profile at once Steps:        1. Login to Mygeotab > Go to Administration > Then Users              2 Then Go to Filter > Under Filter by Clearance option Select 'Drive app User'    ...

    • How to update the Geotab Assign the Unassigned logs in Bulk.

      Introduction: This will guide you step by step Assign the Unassigned logs to a particular driver or vehicle at one time. Procedure  Login to the Geotab portal On the left panel click on the Activity tab. Under the activity tab now click on HOS. ...

    • Compliance Report Add-in - Sending previous 14 days logs to an email

      Introduction       Compliance Report add-in can be used for sending previous 14 day logs to anyone from drive app. This add-in can also be used by Canadian drivers to send the HOS logs to a Canadian DOT officer to an email Steps:  To install this ...

    • Geotab Drive - Drivers drive logs are not changing automatically

      This article explains how to fix drivers drive logs when they are not changing automatically. Meaning It could be because the device is in Listen Only Mode. What this means is that the device has a loose connection. It can be something as simple as ...