How to create a custom speeding rule with speed limit and duration?

How to create a custom speeding rule with speed limit and duration?

How to create a custom speeding rule manually:

  1. Navigate to Rules & Groups > Rules.
  2. Click Add at the top.
  3. Click the Conditions tab.
  4. Click Add speed to creates a condition of Over or Under a specific speed.
  5. Click Add speed limit to creates a condition of Over the limit by a specific speed.
  6. Select whether to exclude or include estimated speed limits by selecting On or Off next to the Exclude estimated speed limits option 
  7. Set Road speed provider to "Commercial" or "Community" based on your desire.
  8. Click Add.
  9. Click Add duration to creates a condition of Over or Under a specific time frame.

How to create a custom speeding rule using default rule:

  1. Navigate to Rules & Groups > Rules.
  2. Scroll down to the "Speeding" rule and click a pencil icon: mceclip0.png
  3. Click the Conditions tab.
  4. Click the paper icon mceclip1.png to open up the Advanced Conditions Editor to modify the rule.
  5. Click Save

    • Related Articles

    • MyGeotab - Creating custom seat belt rule based on time duration

      This article explains how to create a seat belt rule based on time duration. Steps       1. Login to Mygeotab > Go to Rules & Groups        2. Then click Rules > Add Rule        3. Then Go to Conditions > Add Engine > Click Measurement and Data       ...

    • Turn Driver Feedback on for speeding over limit

      Please follow the below steps to Setup a Rule to turn Driver Feedback on If Driver is speeding over the speed limit. Steps       1. Login to Mygeotab database       2. Go to Rules and Groups       3. Click on Add Rule       4. Enter the Rule Name , ...

    • Create and Delete Custom Rules on Zenducam

      Introduction The below information will assist you in creating and deleting the custom rules on Zenducam  Follow the below steps to create a custom Rule on Zenducam : Log in to the Database Open Zenducam Tab Click on Admin Create Rule as shown in the ...

    • Average Speed Report for a zone

      Average Speed Report can be setup to monitor the speed inside a zone  You will need to create a zone and create a rule for the vehicles inside of the zone . Step 1: Create a zone  Click on the link and follow the steps on How to create a zone? Step 2 ...

    • MyGeotab - Update Posted road Speed

      Steps       1. Log into your MyGeotab database       2. Go to 'Map'       3. Zoom in to the road you wish to add the speed limit       4. Left click on the road & Select 'Update Posted Road Speed'             5. Enter the Speed Limit you wish to add ...