How to get report that include Distance Between the Zones from Geotab portal

How to get report that include Distance Between the Zones from Geotab portal

Introduction

This article will help you to export the report from the Mygeotab database of the distance between the customer zone.

Procedure

Advance Detailed Trip Report which includes the distance traveled within the zone and between other zones including the timestamps. You can find this report by following steps: 

  1. Login to the Geotab portal
  2. Click on Map 
  3. Select the Asset from the Top
  4. Click on Trip History 
  5. Choose Advanced from Report section 



    • Related Articles

    • How to get report that include Distance Between the Zones from Geotab portal

      Introduction This article will help you to export the report from the Mygeotab database of the distance between the customer zone. Procedure Advance Detailed Trip Report which includes the distance traveled within the zone and between other zones ...

    • ZenScore - Setting up email reports

      This article explains how to set up email reports on ZenScore.  Steps       1. Login to Mygeotab > Select Zenscore               2. Go to Settings > Then click on Email Reports       3. Select Frequency to receive an email report       4. Then select ...

    • Historical data for new zones

      In order to retrieve historical data in customer visits for recently created zones , Data Reprocessing is needed . Reprocessing step can be found HERE Steps Once data is reprocessed , please follow the below steps:        1. Go to Zones & Messages ...

    • MyGeotab - How to Pull a Watchdog Report

      This article explains how to get a watchdog report in MyGeotab. Steps       1. Go to Administration > Select Reports Setup  > Report Views       2. At the top, search for "Watchdog Report"       3. If the Report is not visible, select Show all types ...

    • Engine Measurement reports show in metric values instead of imperial

      Pulling the Odometer and/or Fuel usage report under the Engine & Maintenance Measurements will always show in metric values. Users will then have to convert that data to imperial if needed. You can download and upload this Excel Conversion ...