How to Install Geotab's GO Plug-&-Play Vehicle Tracking Device Video
Related Articles
Move Go device to a new vehicle
Please follow the below steps to correctly move the device between vehicles : Steps Physically unplug the GO device from the old vehicle In the MyGeotab database, click on Vehicles Select the old vehicle from which you just unplugged the GO device ...
How to Install Geotab's GO Plug-&-Play Vehicle Tracking Device Video
https://youtu.be/KmXJfkRXGm4?t=8
MyGeotab - Activate Geotab Device
This article explains how to activate a Geotab device. Procedure Once the Geotab Device is installed in a vehicle: 1. Take a vehicle in-which a Go Device is installed 2. Take it on a 10 - 15 minute trip in an area with good cellular ...
Activating a Go Device
This article explains how to activate a GO device once installed. Once installed, a GO device needs to record 150 logs within one single connection to the servers and an ignition OFF event in order to activate and start getting billed. This would ...
Geotab causing Battery Drain for the vehicle
If the vehicle is experiencing battery drain issue caused by Geotab device , check for Engine Faults . If there are any faults reported for the unit e.g multiple faults for Telematics device removed , unplugged or restarted , Please collect the ...