How To Set Driver Ruleset

How To Set Driver Ruleset

  1. Select Administration > Users
  2. Select the user 
  3. Select HOS Settings
  4. Select desired Rule-set
  5. Click Save

    • Related Articles

    • How To Set Driver Ruleset

      Select Administration > Users Select the user  Select HOS Settings Select desired Rule-set Click Save

    • Device not beeping for Driver ID reminder

      Device not beeping for Driver ID reminder with Driver feedback turned On  When an IOX-NFC is connected to a GO device, the Driver ID relay is set to 'Use driver key to control Driver ID relay' by default . If a user manually sets this to either of ...

    • ZenScore - Setting targets for different rules to measure driver scores

      This article explains how to set up targets for different rules to measure driver performance. Steps       1. Login to Mygeotab > Go to Zenscore               2. Click Settings on the top right corner           3. Go to Rules and then Target         ...

    • MyGeotab - Driver ID Relay

      Information on Driver ID Relay can be found by following below steps : Steps 1. Go to vehicles 2. Select a vehicle 3. Click on Show help beside vehicle name 4. Click on more details on top 5. Go to Driver ID Relay. This will display the information ...

    • MyGeotab - Reactivate Archived Driver

      This article explains how to reactivate an archived driver in MyGeotab. Steps       1. Login to your Database       2. Navigate to 'Administration' > 'Users'       3. Click on 'Filter'       4. Turn on the 'Show Archived (historical)' data       5. ...