Install - CRX

Install - CRX

Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following website "   http://install.smartwitness.com   "   
Review Install and Verification Instructions: Click Here  
Device Configuration Guide: Click Here
SD Card Configuration Software Download: Click Here
Default INI File (If not configured) - No default settings, CRX is manually programmed prior to shipment based on the customer/project needs
CRX PC Software Analysis tool Download: Click Here

    • Related Articles

    • Installing Driver Whitelist Tool on Mygeotab

      This article explains how to install whitelist tool on Mygeotab Database. Introduction Driver Whitelist Add-In is used to manage vehicle and driver key control i.e. Adding, Permanently Removing, Enabling and Temporarily Disabling Drivers from ...

    • Install - CP1 with 3G Camera

      Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...

    • Install - CP4 with 4G Camera

      Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...

    • Flex - Temperature Sensor Install Guide

      Pre-Installation Please refer to the Getting Started Guide to understand basic device functionality and comprehensive device installation instructions. Arranging temperature sensor according to zones If installing multiple temperature sensors on the ...

    • Install - KP1S 4G 3 Wire Camera

      Before installing your device, please document your device serial number. You will need this information at a later time to verify your installation. After completing the installation, please submit the installation details through the following ...