MyGeotab - Activate Geotab Device
This article explains how to activate a Geotab device.
Procedure
Once the Geotab Device is installed in a vehicle:
1. Take a vehicle in-which a Go Device is installed
2. Take it on a 10 - 15 minute trip in an area with good cellular coverage in order to meet activation requirements
Make sure you add the new Device to the MyGeotab Database
Related Articles
Activating a Go Device
This article explains how to activate a GO device once installed. Once installed, a GO device needs to record 150 logs within one single connection to the servers and an ignition OFF event in order to activate and start getting billed. This would ...
Move Go device to a new vehicle
Please follow the below steps to correctly move the device between vehicles : Steps Physically unplug the GO device from the old vehicle In the MyGeotab database, click on Vehicles Select the old vehicle from which you just unplugged the GO device ...
Mygeotab - Activate or Deactivate Automatic Vehicle Management Feature
This article explains how to activate or deactivate Vehicle Management Feature. Introduction When this feature is activated, it manages whenever devices are switched between vehicles. It automatically archives the vehicle and creates a new vehicle, ...
Add device in Mygeotab
Please follow the below steps to add a device in MyGeotab database. Steps Login to Mygeotab database Go to Vehicles Click on Add> Add device Enter serial number and Description Click Ok
Odometer discrepancies in MyGeotab and Vehicle Dashboard
This article explains the odometer discrepancies in MyGeotab and Vehicle Dashboard. It is common for odometers to be off by ±5%. Odometer errors are typically proportional to speedometer errors. Speedometers can have built-in tolerances up to ±10%, ...