MyGeotab - How to Assign Groups to a Custom Rule
This article explains how to assign groups to custom rules in MyGeotab.
This article explains how to assign groups to a custom rule in MyGeotab.
Steps
1. Select 'Rules & Groups' & Click 'Rules'
2. Scroll down to Advanced
3. Click on the specific Rule
4. Locate Select Groups
5. Select the desired Group
6. Click on 'Save'
7. You have successfully assigned Groups to a Custom Rule
Related Articles
MyGeotab - Creating custom seat belt rule based on time duration
This article explains how to create a seat belt rule based on time duration. Steps 1. Login to Mygeotab > Go to Rules & Groups 2. Then click Rules > Add Rule 3. Then Go to Conditions > Add Engine > Click Measurement and Data ...
MyGeotab - How to Remove Specific Vehicle from a Custom Rule
This article explains how to remove specific vehicles from a custom rule in MyGeotab. Procedure This can be Achieved using groups by assigning the rule to a group which does not contain the vehicle you wish to exclude. Assign the vehicles you wish to ...
MyGeotab - How to set up Email Notifications for a rule
This article explains how to set up email notifications for a rule. Steps 1. Select 'Rules & Groups' > 'Rules' 2. If you want a default rule, select Manage Recipients (the envelope icon) 3. If you want a custom rule, select desired ...
Mygeotab - Creating custom Zone Type
This article explains how to create custom zone types: Steps: Login to Mygeotab > Go to Zones & Messages Click on Zones Then Click on Add Add Name and Comments (Optional) Click Save to apply changes
Create and Delete Custom Rules on Zenducam
Introduction The below information will assist you in creating and deleting the custom rules on Zenducam Follow the below steps to create a custom Rule on Zenducam : Log in to the Database Open Zenducam Tab Click on Admin Create Rule as shown in the ...