MyGeotab - PTO data from Engine

MyGeotab - PTO data from Engine

Steps

      1. Login to MyGeotab
      2. Navigate to 'Engine & Maintenance' > 'Engine and Devices' > 'Measurements'

      3. Select 'Date Period'
      4. Select 'Vehicles'

      5. Under Diagnostics type 'PTO' and select all the Diagnosis for PTO

      6. Click on 'Apply changes'

      7. You have successfully pulled up the PRO engine data.

Notes: 

  1. If your vehicle provides engine data for PTO, then we will be able to get this information as long as your device is on a plan that includes engine data (Pro or ProPlus).
  2. If your vehicle does not provide engine data for PTO, you can collect this data by using the IOX-AUXM. In this case, the device does not need to be on a plan that includes engine data (you will have to create a rule for PTO).

    • Related Articles

    • MyGeotab - Setup PTO Rule

      This article explains how to setup the PTO rule in MyGeotab. Steps       1. Log in to database       2. Navigate to 'Rules & Groups' > 'Rules'       3. Click on 'Add'       4. Give the name to 'Rule' and navigate to 'Conditions'       5. Select 'Add ...

    • Accessing Engine Data

      Click here or see below for instructions on accessing engine data in MyGeotab   Your Telematics Device is designed to collect and respond to status information in your vehicle. The port it is installed in is traditionally used for on-board ...

    • MyGeotab - Reprocessing Data

      This articles explains how to reprocess the data on MyGeotab.  Introduction Reprocessing will go back over previous trips and recalculate the data. It can often fix incorrect logs, reapply rules to Trips, and help our system to re-validate the data.  ...

    • MyGeotab - Calculating engine hours for a specific date range

      This article explains how to calculate engine hours for a specific date range on MyGeotab. Steps       1. Login to Mygeotab        2. Click on 'Engine & Maintenance' > Go to 'Engine and Device'        3. Then go to 'Measurements'               4. Go ...

    • Historical data for new zones

      In order to retrieve historical data in customer visits for recently created zones , Data Reprocessing is needed . Reprocessing step can be found HERE Steps Once data is reprocessed , please follow the below steps:        1. Go to Zones & Messages ...