MyGeotab - Setup PTO Rule

MyGeotab - Setup PTO Rule

This article explains how to setup the PTO rule in MyGeotab.

Steps

      1. Log in to database
      2. Navigate to 'Rules & Groups' > 'Rules'


      3. Click on 'Add'


      4. Give the name to 'Rule' and navigate to 'Conditions'


      5. Select 'Add engine'


      6. Select type as 'Active Faults'
      7. Under Diagnostics type: "Power take off engaged (1 = engaged)"


      8. Click on 'Add'


      9. You have successfully added the PTO Rule

    • Related Articles

    • MyGeotab - PTO data from Engine

      Steps       1. Login to MyGeotab       2. Navigate to 'Engine & Maintenance' > 'Engine and Devices' > 'Measurements'       3. Select 'Date Period'       4. Select 'Vehicles'       5. Under Diagnostics type 'PTO' and select all the Diagnosis for PTO   ...

    • MyGeotab - Creating custom seat belt rule based on time duration

      This article explains how to create a seat belt rule based on time duration. Steps       1. Login to Mygeotab > Go to Rules & Groups        2. Then click Rules > Add Rule        3. Then Go to Conditions > Add Engine > Click Measurement and Data       ...

    • MyGeotab - How to set up Email Notifications for a rule

      This article explains how to set up email notifications for a rule. Steps       1. Select 'Rules & Groups' > 'Rules'       2. If you want a default rule, select Manage Recipients (the envelope icon)       3. If you want a custom rule, select desired ...

    • MyGeotab - Calculating engine hours for a specific date range

      This article explains how to calculate engine hours for a specific date range on MyGeotab. Steps       1. Login to Mygeotab        2. Click on 'Engine & Maintenance' > Go to 'Engine and Device'        3. Then go to 'Measurements'               4. Go ...

    • Turn Driver Feedback on for speeding over limit

      Please follow the below steps to Setup a Rule to turn Driver Feedback on If Driver is speeding over the speed limit. Steps       1. Login to Mygeotab database       2. Go to Rules and Groups       3. Click on Add Rule       4. Enter the Rule Name , ...