MyGeotab - Setup Purge

MyGeotab - Setup Purge

This article explains how to setup the purge feature in MyGeotab.

Steps

      1. Login to MyGeotab
      2. Navigate to 'Administration' > 'System' > 'System Settings'


      3. Click on 'Purge'


      4. Enable 'Routinely Purge Older Data'


      5. Click on 'Add Purge Schedule'


      6. Fill out all the necessary fields


      7. You have successfully added Purge

It is important to note that for compliance reason, HOS logs must be retained for 6 months. So the workaround will be to archive the users you would like to remove and put them in a group that will be set up to purge HOS logs outside of the most recent 6 months. This likely means that the users will have to be archived for at least 6 months before they can be removed. Only Admins with Security Clearance which contains System Settings can add Purge.



    • Related Articles

    • MyGeotab - Setup Purge

      This article explains how to setup the purge feature in MyGeotab. Steps       1. Login to MyGeotab       2. Navigate to 'Administration' > 'System' > 'System Settings'       3. Click on 'Purge'       4. Enable 'Routinely Purge Older Data'       5. ...

    • Setup SAML user

      In order to setup a user with SAML Authentication , Please follow steps : Steps: 1. Login to Mygeotab database 2. Go to Administration > System > System Settings  3. Go to Certificates  4. Enter the Certificate issuer link  Note : Login and Logout ...

    • MyGeotab - Setup PTO Rule

      This article explains how to setup the PTO rule in MyGeotab. Steps       1. Log in to database       2. Navigate to 'Rules & Groups' > 'Rules'       3. Click on 'Add'       4. Give the name to 'Rule' and navigate to 'Conditions'       5. Select 'Add ...

    • Add device in Mygeotab

      Please follow the below steps to add a device in MyGeotab database. Steps Login to Mygeotab database Go to Vehicles Click on Add> Add device Enter serial number and Description Click Ok

    • MyGeotab - Review DVIR Reports

      This article explains how to review DVIR reports in MyGeotab. Steps       1. Navigate to engine and maintenance, then DVIR,       2. Under options, fill out all the necessary information (Reports can be filtered by defective, repaired or certified)   ...