Valor- Tire Trailer Kit- Where can I view the temperature in my database?
To view the temperature from the database, please follow the steps below:
Log into your database.
Select Engine & Maintenance, from the navigation menu on the left.
Select Engine and Device… from the sub-menu.
From the dropdown menu, select Measurements.
For Diagnostics, enter the word reefer and select all relevant measurements.
Related Articles
Valor TempTrac device is not providing temperature readings.
Geotab - Valor TempTrac Setup Overview Add Geotab Device to Geotab Portal Make sure that the Geotab device is added and functioning in Geotab Configure Geotab Device Settings · Open the Geotab Device in MyGeotab a) Go to Vehicles b) ...
Valor- Tire Trailer Kit -Troubleshooting steps for the TempTrac integration?
Verify the GO device is functioning correctly. Verify the GO device has the required firmware. To check the required firmware in MyGeotab: In MyGeotab, navigate to the Vehicle Edit page and select +More Details. Scroll down to view the firmware ...
Installation Guide for Setting up Valor TPMS with Geotab
Valor’s Tire Pressure and Temperature Monitoring Kits are for use in: Straight truck / Bus up to 6 axles 24 tires Tractor with or without a trailer to 6 axles 24 tires Max. 3 trailers onto one tractor 6 axles 24 tires each trailer Reporting and ...
Flex - Temperature Sensor Install Guide
Pre-Installation Please refer to the Getting Started Guide to understand basic device functionality and comprehensive device installation instructions. Arranging temperature sensor according to zones If installing multiple temperature sensors on the ...
Vehicle or Trailer is not showing on the Drive app
ISSUE: Vehicle or Trailer is not showing on the Drive app. Vehicle or Trailer is not showing in the Drive App 1. Check if the Godevice is communicating. a. check installation b. check harness / wire connections c. check if Go device ...