ZenduCAm - Link Geotab unit with the camera unit

This article explains how to sync the Geotab unit with the camera unit.

Steps

Please follow the below steps to sync Geotab devices with the camera units.

      1. Login to Geotab

      2. Go to ZenduCAM add-in

      3. Select Admin tab > Devices

      4. Click on Edit

      5. Enter the Geotab serial number in the Geotab Serial Number field

      6. Click on Save

 

• Related Articles

• Geotab causing Battery Drain for the vehicle

  If the vehicle is experiencing battery drain issue caused by Geotab device , check for Engine Faults . If there are any faults reported for the unit e.g multiple faults for  Telematics device removed , unplugged or restarted , Please collect the ...

• Logging into ZenduCAM

  Agent: Morgan To login to your Trax/ZenduCAm application, use this link:  http://trax.zenduit.com/ Enter your username and password to log in. If you have a Geotab database, your zenduCAM application can be accessed directly from Geotab. Simply click ...

• Logging into ZenduCAM

  Agent: Morgan To login to your Trax/ZenduCAm application, use this link: http://trax.zenduit.com/ Enter your username and password to log in. If you have a Geotab database, your zenduCAM application can be accessed directly from Geotab. Simply click ...

• Add Device - Trax ZenduCam

  This article demonstrates the steps to follow to add a device in Trax ZenduCAM. Only Admins will have access to adding the device. Steps       1. Login to ZenduCam/Trax where you have the ZenduCam Add-in       2. Click on 'Admin'             3. Click ...

• Create and Delete Custom Rules on Zenducam

  Introduction The below information will assist you in creating and deleting the custom rules on Zenducam  Follow the below steps to create a custom Rule on Zenducam : Log in to the Database Open Zenducam Tab Click on Admin Create Rule as shown in the ...