Geotab Go
Move Go device to a new vehicle
Please follow the below steps to correctly move the device between vehicles : Steps Physically unplug the GO device from the old vehicle In the MyGeotab database, click on Vehicles Select the old vehicle from which you just unplugged the GO device ...
Geotab Go6 Installation Guide
NOTE: The CAN Box Transceiver (A) needs to be installed near the G06 Unit (“H” in Diagram below). ‣ Connect the supplied Valor Wire Harness (B) to the CAN Box Transceiver (A). ‣ Connect the other end of the supplied Valor Wire Harness (B) to the ...
Geotab GO8 Installation Guide
Installation in Four Steps Based on the warnings above, if you determine that a professional installation by an Authorized Installer is not required, the following basic installation steps can be followed. Locate the vehicle’s engine diagnostic port ...
How to Install Geotab's GO Plug-&-Play Vehicle Tracking Device Video
https://youtu.be/KmXJfkRXGm4?t=8
GO9 Installation guide
Before Installation, add the device to your online Fleet Management Application using the device serial number. This will ensure all data logged from point of install onward is sent to your online application. Preparing For Installation Before ...
Geotab Go9+ installation Guide
Expandable Telematics & WiFi Device (BETA) For the most up-to-date version of this document, please visit gtb.page.link/yXpm. The telematics device is a small form-factor device. Device installation is often straightforward and can be completed ...