Custom Parameters

Custom Parameters


How do I perform advanced configuration of my IOX device?


To enter custom parameters for your vehicles, perform the following from your Geotab database: Vehicles > (select vehicle) > + More details > Custom parameters > (copy and paste the desired custom parameter) > Add new parameter > Save.

The following custom parameter is used in the cases where the seatbelt alerts are being wrongfully triggered:

<GoParameters><Parameter Description="Clear Saved Seatbelt and Odometer" Bytes="80" Offset="64"/></GoParameters>

* Custom parameter is also used in the cases where the Odometer readings for a registered vehicle are not correct, by resetting the collection

The following custom parameter is used when the GoTalk volume needs to be manually preset to a constant volume:

<GoParameters><Parameter Description="GoTalk min Volume level=2 (0 to 6)" Offset="175" Bytes="2"/></GoParameters>
​
* To change the constant volume of the GoTalk device, change the Bytes variable to any number between 0 and 6. 0 being silent

Agent: Nik
Date: May 30, 2019


    • Related Articles

    • Create and Delete Custom Rules on Zenducam

      Introduction The below information will assist you in creating and deleting the custom rules on Zenducam  Follow the below steps to create a custom Rule on Zenducam : Log in to the Database Open Zenducam Tab Click on Admin Create Rule as shown in the ...

    • Mygeotab - Creating custom Zone Type

      This article explains how to create custom zone types:  Steps:  Login to Mygeotab > Go to Zones & Messages Click on Zones Then Click on Add         Add Name and Comments (Optional) Click Save to apply changes        

    • Reduce GPS Sensitivity in Vehicles (for low speed)

      Custom parameter which will reduce sensitivity when the vehicle is travelling at low speeds. To access the Custom Parameters, click on More details on the Vehicle Edit page. Under the tab for custom parameters you can use the following parameter: ...

    • MyGeotab - Creating custom seat belt rule based on time duration

      This article explains how to create a seat belt rule based on time duration. Steps       1. Login to Mygeotab > Go to Rules & Groups        2. Then click Rules > Add Rule        3. Then Go to Conditions > Add Engine > Click Measurement and Data       ...

    • turn off odometer reading for truck being towed

      prevent vehicle to update  odometer reading  while being towed  Solution: We can add custom parameter to prevent the vehicle from updating odometer . Please find below the custom parameter that needs to be applied to prevent the vehicle form updating ...