Click here
or see below for instructions on setting up vehicle-based driver feedback in MyGeotab
Audible in-vehicle alerts can improve the on-road driving behavior of your drivers by notifying them of unsafe or potentially risky driving events. You can configure alerts to sound on a number of events including unbuckled seat belts or speeding. If an event is triggered, the driver will need to correct their on-road behavior for the alert to cease.
Driver feedback helps your organization develop a fleet-wide safety program that works without direct intervention. Your fleet managers can review this information with real-time reporting (see
Reports). Additionally, the system can be configured to send out email or text message notifications to fleet managers when drivers trigger events (see
Exceptions).
Device not beeping for Driver ID reminder with Driver feedback turned On When an IOX-NFC is connected to a GO device, the Driver ID relay is set to 'Use driver key to control Driver ID relay' by default . If a user manually sets this to either of ...
Please follow the below steps to Setup a Rule to turn Driver Feedback on If Driver is speeding over the speed limit. Steps 1. Login to Mygeotab database 2. Go to Rules and Groups 3. Click on Add Rule 4. Enter the Rule Name , ...
This article explains how to set up targets for different rules to measure driver performance. Steps 1. Login to Mygeotab > Go to Zenscore 2. Click Settings on the top right corner 3. Go to Rules and then Target ...
Information on Driver ID Relay can be found by following below steps : Steps 1. Go to vehicles 2. Select a vehicle 3. Click on Show help beside vehicle name 4. Click on more details on top 5. Go to Driver ID Relay. This will display the information ...
This article explains how to authorize drivers/users to a vehicle. Steps 1. Login to Mygeotab > Go to Administration 2. Then Click 'Authorized Driver Tool' 3. Then select Vehicles option 4. Select desired drivers ...